多人一起做人爱视频

  • <th id="jkxsj"><sup id="jkxsj"></sup></th>

      <code id="jkxsj"><small id="jkxsj"></small></code>

        <thead id="jkxsj"><option id="jkxsj"></option></thead>

        <thead id="jkxsj"><option id="jkxsj"><progress id="jkxsj"></progress></option></thead>

        1. Chip-spreader and Distributor

          Brief Introduction
          Chip spreader is mainly applied for the spreading work. It adopts the penetration method to spread the aggregate, powder, chips, grit, macadam and asphalt macadam to the prime coat, under sealing layer, chip seal and micro-surfacing of the pavement.

          Features
          1. The chip spreader has 10 gates. Each gate is controlled by the independent cylinder while every cylinder is controlled by the independent on-off switch. The on-off switch could indirectly control the gate through controlling the cylinder.
          2. Each gate is equipped with micro-adjusting mechanism to control the gatage. Then the chip spreading speed could be controlled to adjust the uniformity degree of spreading.
          3. The special anti-skidding device for the roller keeps the spreading well-distributed.

          Technical Parameter
          Category Name Unit Remark
          Basic Parameters Model SS3100
          Name Chip Spread
          Dimension 2500×2000×1900 mm Graduation:250
          Spreading Width ≤3100 mm Adjustable
          Macadam Dia. ≤25 mm
          Spreading Volume 3~22 m3/km2
          Spreading Speed 3-4.8 km/h
          Weight 1150 Kg

          Construction Case

          • Construction in Liaoning, China
          • Construction in Hanyang, Hubei Province
          多人一起做人爱视频

        2. <th id="jkxsj"><sup id="jkxsj"></sup></th>

            <code id="jkxsj"><small id="jkxsj"></small></code>

              <thead id="jkxsj"><option id="jkxsj"></option></thead>

              <thead id="jkxsj"><option id="jkxsj"><progress id="jkxsj"></progress></option></thead>